The effectiveness of innovation: anti-static, odour-absorbing and self-cleaning treatments

Apart from painting products, a range of smart products for every-day needs has been developed thanks to experience and innovation.

Benefits:

  • Elimination of unpleasant odoursin houses, hotels, RVs and boats
  • Bactericidal actionon all absorbing surfaces of buildings
  • Anti-static actionon internal surfaces
  • Self-cleaning effecton photovoltaic panels
  • Sanitising treatments certified by the Ministry of Healthfor rooms and surfaces
Vernici-innovative-all-acqua
Pittura-al-quarzo-ecologica

SPOT-FIX

Water-based, stain-resistant fixative.

Spot-Fix is a sealant fixative and stain-resistant insulator to be used as a primer for the treatment of old bituminous, smooth or slated membranes. It is ideal for walls in masonry, gypsum, plasterboard and concrete whenever impregnated with nicotine or with dry moisture stains. To optimise the performance of the painting cycle, Spot-Paint water-based, stain cover paint is recommended as a finish. It is ideal in environments such as bakeries, food factories and bars, etc.

  • Very high stain-resistant and penetrating strength.
  • It improves finishing paint anchoring and binding.
  • Uniform colour absorption.

On internal and external supports – new or already painted – suitably prepared, clean, dry and brushed. If there is mould on inside walls, first apply a suitable coat of Lindofix, while on outside walls with algae formation, use Lindostop. After 24 hours, apply a coat of Spot-Fix. If the membrane is new, it is recommended to wait 5-6 months before applying the fixative and the finishing product (Thermo-Gum, Thermo-Gum Evolution or THERMO-GUM Calpestabile (Walk on)). New membranes release oily substances that could compromise binding and the duration of the application cycle, causing unsightly stains.

Technical features

Application for interiors and exteriors

Colour

Transparent

Packaging

1, 5 and 20 Liters

Dilution

1:1 with clear water

Application

Brush

Yield

5 – 6 sqm/Lt per coat

NANOPRIMER

Water-based primer-finish and universal anticorrosive binding agent for metal, ceramic, plastic and wood surfaces.

Nanoprimer is the new generation primer-finish. Nanotechnological, anticorrosive and water-based, specifically designed for surfaces in metal, ceramics, plastic and wood. It is a good bonding bridge for surfaces already painted with solvent or powder enamels. Its water-based anticorrosive composition is ideal in applications where the use of an effective, non-flammable and odour-free solution is required. Nanoprimer is the ideal base product for the application of Themo-Metals.  Simple and easy to apply.

  • Simple and easy to apply.
  • Very high anchoring strength on many types of surfaces.
  • Non-yellowing.
  • Very long life.
  • Satin-finish effect.
  • Odourless and safe for the environment and for humans.

On various types of substrates, such as iron, galvanised surfaces, ceramics, wood, aluminium and PVC, suitably prepared, clean, degreased and rust-free.

Technical features

Application for interiors and exteriors

Colour

White

Packaging

2,5 and 18 Kg and 0,75 Liters

Dilution with clear water

10% roller; 15% brush; 20% spray

Application

Brush – roller – spray

Yield

7-8 sqm/Lt (5-6 sqm/7Kg) per coat

Pittura-fotocatalitica-per-esterni

TOP-GUARD WR

Solution with hydro-oil repellent action, anti-algae, non-toxic and ready-to-use.

It creates a water-oil-repellent, stain-resistant and anti-algae action on absorbent, porous materials such as: terracotta floor tiles, natural and absorbent synthetic stone, concrete or marble floors and concrete products in general, which need to be protected from water, atmospheric agents and oil absorption. Applied in an appropriate quantity (variable in relation to the absorption and roughness of the surface), TOP GUARD WR is also ideal for protecting new or already painted façades (in particular those facing north) and walls with facing bricks, etc. A surface treated with Top Guard WR retains its new appearance for longer, making it easier to clean when needed. It penetrates into absorbent mineral supports through capillary impregnation. It does not alter the colour of the substrate and maintains sufficient permeability to water vapour. The effectiveness of the product begins after 24 hours and is 100% active after 2-3 days.

  • Surface protection: Top-Guard WR helps protect substrates.
  • Enhancive visual effect: It revives and does not alter the aesthetic appearance of the surfaces to which it is applied.
  • Long lasting and high-quality finish: Less maintenance over time means greater cost savings.
  • It facilitates surface cleaning.

Mix the product well before use and do not mix with other products (which could react chemically). Apply the product during warm weather and use a low pressure spray gun or a brush; in the case of two-coat application, use the “wet-on-wet” system. Leave to dry for about 14-16 hours. Not suitable for non-absorbent or shiny surfaces.

Technical features

Application for exteriors

Colour

Milky transparent

Packaging

1 and 5 Liters

Dilution

Ready to use

Application

Brush – spray

Yield

4-5 sqm/Lt per coat

Nanometric pigments and sunlight: a winning team

Intonachino-silossanico-idrorepellente

NANO-SIL RIEMPITIVO (FILLER)

Breathable, siloxane, water-repellent, filler and anti-algae and water-based paint with oxidising and self-cleaning action.

Nano-Sil is used in construction (traditional plasters, reinforced skim coats and coat systems) as a breathable, siloxane, water-repellent, quartz, anti-algae filler, with oxidising and self-cleaning action, obtained thanks to the use of special nanometric pigments that are “activated” by sunlight and neutralise all organic substances (mould, algae and smog, etc.) which settle on the surface, and which later spread due to rain.

  • Self-cleaning effect : In combination with sunlight, they break down the most harmful organic pollutants into harmless nitrates with low environmental impact.
  • Water repellent.
  • High permeability to water vapour.
  • High resistance to chalking.
  • High protection from mould and algae.
  • High anti-carbonation power.
  • Long lasting and high-quality finish: the photocatalytic finishes preserve the façade original appearance. This means less maintenance and greater savings.
  • Environment friendly: It reduces the presence of pollutants on surfaces, rendering them perfectly antibacterial.

It is ideal as a base coat for the application of Nano-Coat. On clean, dry and suitably consolidated façades. 2-coat application.

Technical features

Application for exteriors

Colour

White and oxide colours

Packaging

15 Liters

Dilution

15-20% with clear water

Application

Brush – roller

Yield

7-8 sqm/Lt per coat

Mantenere-pulite-le-facciate

NANO-COAT

Modified siloxane plaster, water-repellent, anti-algae and with oxidising and self-cleaning action.

Nano-Coat is a siloxane, water-repellent plaster for external surfaces (traditional plasters, reinforced skim coats and cladding systems) against mould and algae, with an oxidising and self-cleaning action, obtained thanks to the use of special nanometric pigments that are “activated” by sunlight and neutralise all organic substances (mould, algae and smog, etc.) which settle on the surface, and which later spread due to rain. Nano-Coat is marked by high  resistance to atmospheric agents.

  • Self-cleaning action: In combination with sunlight, they break down the most harmful organic pollutants into harmless nitrates with low environmental impact.
  • Ideal as a finish for external cladding.
  • Water-repellent.
  • High permeability to water vapour.
  • High resistance to chalking.
  • High protection from mould and algae.
  • Long lasting and high quality finish: The photocatalytic finishes preserve façade original appearance. This means less maintenance and greater savings.
  • Environment friendly: It reduces the presence of pollutants on surfaces, rendering them perfectly antibacterial.

On suitably prepared and consolidated supports, after a base coat with Nano-Sil Riempitivo (Filler)

Technical features

Application for exteriors

Colour

White and oxide colours

Packaging

25 Kg

Dilution

Ready to use, max. 1% with water

Yield

2 Kg/smq

Resa

2 Kg/mq

Focus

Photocatalytic products meaning cleaner façades for longer

Photocatalysis is a natural phenomenon through which a substance exposed to light, called a photocatalyst, induces a strong oxidation process capable of decomposing and converting nitrogen oxides and other harmful pollutants, such as formaldehyde and acetaldehyde, into harmless nitrates.

The reaction helps destroy organic materials, keeping the surface cleaner.

Photocatalytic paints are able to counteract the formation of microbes, bacteria and soiling and deteriogenic organic substances, reducing the frequency of maintenance and retouching.

The Nano-Sil Riempitivo (Filler) and Nano-Coat products cannot be made up in dark colours with organic pigments (which would be consumed), but only in shades deriving from white and coloured with oxide pigments.

Distruggere-materiali-organici

For the final choice of the application cycle of the products, always refer to the relative technical data sheets and to our staff to verify, case-by-case, their actual suitability. The Nanotech insideR products – all certified and compliant with EU regulations – are complete system of application and therefore provide the applicator with substantial guarantees on the success of the intervention. In order to obtain the best result, it is necessary to carefully follow all the indications given in our technical data sheets in force at the time of the beginning of the work, thus exempting us from any responsibility, both in case of incorrect application, and in the presence of hidden and pre-existing problems in the structure subject to the intervention.